Carpet Removal: How to Remove Your Old Carpet



If you are changing the carpet or installing a new floor, you probably already spend hundreds, even thousands of dollars. You can remove the old carpet yourself before the installers arrive to save money. This saves both time and money and is easier than you might think.

Talk to your founder or contractor to see how much you can save by making the tear yourself. Then, remove all doors that open into the room, including two-story cupboard doors. Doors to other rooms can be left. Clean the floor completely and remove all furniture from the room. Wear some gloves to protect the joints from the abrasive carpet backing and adhesive tape (technically called “no adhesive tape)). In addition, use a mask to wear safety goggles to prevent inhalation of carpet dust and to protect your eyes.



Pull the carpet up the adhesive tape along the walls. Start from a corner of the room and pull the carpet with pliers. Now remove the carpet by hand and continue to pull up the entire length of the wall. Fold the three-foot carpet back and cut into easy-to-use tapes using a new knife. Cutting the carpet from the back is easier than cutting it from the front, so folding the carpet is a great strategy. Use the sharp new blade of the new knife.

Be careful not to slice the baseboard or walls. Channel strips can be used to wrap carpet strips for easy use. Continue to pull back the carpet and slice it into the strips. If you are putting on a new carpet, when the transition or another floor or other floor joins the carpet, cut the carpet and leave the transition in place. If the transition is made of metal and still in good condition, the installer may request that it remain in place. Doing so will earn an average of $ 10 per pass. If you are installing another type of flooring or laying a parquet floor, you can remove the transitions.

Start from the beginning to remove the carpet from the stairs. Remove the metal noses from the top of the stairs. You should be able to remove it easily. If there is no nose, cut the carpet to the top of the riser, remove the cut and pull the carpet from the stairs. After the pad is torn, pull out the staples with pliers. Again, you can cut and roll large pieces of carpet into strips. On a concrete floor, the pad is glued in place – so some large pieces may remain stuck to the floor; Use a floor scraper to remove. On plywood or chipboard substrates, there will be hundreds of staples to remove. This can be done with pliers, but it can take hours. Use a sharp-tipped floor scraper to remove staples faster.



Obviously, if a new carpet does not come down, you can pull the tape strip up. If you are installing a new wall-to-wall carpet, in most cases the adhesive strip should be left in place. However, there are a few exceptions. Rotting, contaminating or highly rusted parts must be removed. The strip must also be removed if it is longer than 1/4 inch from the baseboard since there must be at least this size of space to properly install the new carpet. To remove the sealing strip, push it up with a flat bar.

Every year, Americans throw about five billion pounds of carpet in the dumps. Therefore, it is best to avoid throwing old carpets to help the environment. There are many alternatives to throwing away. If it is good enough, it may choose to sell and/or give the old carpet from sites such as craigslist.org. Many charities will take old carpets and rugs. Animal shelters and training facilities cover old carpet pieces to be used at the bottom of dog and cat cages. Recycling is also an option. It may be difficult to find facilities to recycle carpet in the area, but it is always a good idea to ask for more options from the new carpet installer or local carpet supplier.

Carpet Removal In 4 Easy Steps


Follow these steps to remove the old carpet. The work can usually be done by one person.

Step 1 – Move All Furniture

You will probably follow this project with another carpet or new parquet flooring. Move the furniture to an empty room where you can store it for several days.



Step 2 – Remove Stripping Tile

The stripping that holds the carpet firmly in place may be nailed or screwed on. If it has remained in place for many years, the floor beneath it may be bent and make it difficult to remove. If a screwdriver or hammer does not work, use a lever to remove all nails.

Step 3 – Remove the Tack Boards

Tack boards allow the wall-to-wall carpet to be fixed to the floor with small nails. Use gloves to remove these sharp parts and be careful.

Step 4 – Start at the Corner

Use the screwdriver as a lever to remove old carpet and bumper foam from a corner. Break up large pieces of carpet. Where possible, use the utility knife to cut the strips you can roll. Be sure to also add the filler material under the wooden parquet price list.

When you’re done, the only thing left is the boards. You can remove them or leave them to serve as part of the new carpet.

Things To Consider During Carpet Removal


We also make some changes in the living spaces of our homes in order to enjoy the sunny weather and holiday season in summer. At the beginning of these changes, of course, the removal of carpets that are one of the most important decoration elements which warm our house in the winter, and are placed almost every room we use from corridors to the entrances and bathrooms comes. So, what should be taken into consideration when removing your carpets to their hiding place during the summer? Here are the tips for your carpets which are the most important decorative and functional needs of your home in the winter season to be more durable and healthier after removal.



First of all, I must say that carpets require regular maintenance. For hygiene and cleaning, as well as for a stylish look and comfortable and long-lasting use, I recommend that you regularly carry out specific maintenance. This turns into an advantage for those who remove their carpets when the summer comes, because you actually perform the annual maintenance of your carpets during the removing and re-laying operations in the spring.

Before coming to annual maintenance and cleaning, let’s briefly talk about how to clean your carpet during the winter. The most effective way to prevent dust and dirt from accumulating in the fluff, that is, in the hairs of your carpet, is to sweep your carpet with a good vacuum cleaner at least twice a week. If there is a need for further cleaning, for example when you want to remove stains, you should never wash your carpet in the middle of winter, just wipe and dry the carpet with shampoos. You should not allow your carpet to come into contact with water for a long time and remain wet.

Of course, there are some things you should be aware of when it comes to the annual maintenance and cleaning of your carpets. The most important of these is the carpet cleaning methods. Most people wash or wash carpets before removing them in summer, so they can easily re-roll when winter begins to take place. It is, of course, healthier and more logical to wash the carpets before they are removed, not before they are laid. Because in the summer carpets are dried up much more quickly and completely, where the drying process may not be healthy in September. And the fact that carpets are completely dry after washing is one of the most important issues for our health as well as to maintain the structure of the carpet and ensure it to be long-lasting.



In the past, carpets were generally washed and dried unprofessionally in the courtyards of the houses due to the lack of development of technology. Today, carpet cleaning centers are quite common with very economical conditions. As a matter of fact, if you want your carpet to be cleaned better and to maintain a healthier and longer-lasting structure, then you should leave this job to the professionals instead of washing your carpet yourself. Remember that it is almost impossible for you to clean all parts of the carpet you wash equally, and even if you do, it is not possible for you to dry completely and in a short time because you do not have the necessary technology. (Do not forget that drying carpets under the sun creates the hardening of carpet feathers and fading in color.) The most important characteristics of carpets are that the more they remain moist, the faster they break down. That is, it is much more advantageous and practical to give your carpets to be washed before removing them in summer.

Let’s come to what we need to do while removing the carpets where they will rest during the summer. You have washed and dried your carpets thoroughly and now they will go to sleep in summer to wait for the new winter season. In this case, the first thing you should pay attention to where you remove the carpets of course. Most people put their carpets in the basements under the houses or the closets on the roof. In fact, it is important to note that its relation to moisture is more important than where it is. Whether you put it in your home’s small storage room, in a large closet, or in a cupboard, you should be sure to keep your carpets in a dry area free of moisture. Because moisture is the biggest enemy of your carpets. It causes the formation of mildew between the pile and affects the health of you and your family. Therefore, you should take care that the place where you remove your carpets does not remain airless and humid during the summer, if necessary, you should ventilate it regularly and let your carpets breathe.

We all know that carpets should be removed by rolling. However, what we have missed is not the weight and thickness of the carpets, but the necessity to store them in rolls. So you may also be able to fold and remove rugs, runners, and some thin carpet types, but you should never do that. No matter how thin, all carpet types and models should be kept in rolls to preserve the integrity of the structure.



And finally, the danger of moths! Carpets that have not been used for a long time, especially carpets with natural materials such as wool, are in danger of being the nest of pests such as moths. For this, when removing carpets, naphthalene is placed between them. However, it is obvious that naphthalene is not a healthy and natural substance. I recommend you not to keep it in homes with children and places where people with allergies live, especially because of its heavy smell and sublimation. There are natural and smelling solutions that you can use instead of naphthalene; The most common and most fragrant of them is lavender and clove. If you put lavender pouches or dry carnation pouches formed from dried lavender rolls between your carpets, your carpets will be protected from moths. Another common method is to use soap grater instead of naphthalene. Of course, in order to prevent the soap grater from sticking to the yarn of the carpet, you have to turn the soap into a pouch with some kind of fabric that is air-permeable.

And one final suggestion; For those who can not give up the carpet, the carpetless house may seem too bare and featureless to the eye. Although it is much easier to keep the floors clean without carpets in the summer, especially when the windows are constantly open and the floors are exposed to street dust, for some, carpet is always a better option than bare floors. In such cases, I recommend you to use carpet models as of summer and winter instead of using the same carpet for the whole year. Thus, you can maintain and clean your winter carpets every year. In addition, in the summer, instead of thick and wide carpets, rugs or thin and lint-free carpets will make your home much cooler and more spacious.

Tools Needed for Carpet Removal


There are 10 tools you need to remove your old carpet. These are:



  • Utility Knife

The utility knife is a one-side sharp knife that moves back and forth in a metal or plastic protection slide and can be fixed with a locking mechanism. It is the sharp metal bar used to be seen in shoe factories. Used to cut, retouch carpet, leather, and rubber. The version in office and stationery environment has a plastic structure and its blade can be changed.

  • Hammer

Hammer is a metal tool used for hammering, nailing and similar works, as well as forging mines. It is a hand tool made mostly of wood, one end with a mallet and one end with flat material. It is used to lighter, beat, flatten, crush something. Hammer types take a wide variety of names according to their usage and construction.

  • Staple Remover

A staple remover is a tool that allows a stapler to be swiftly removed from the place it is attached to without harming the material.

  • Pliers

A pliers is a hand tool used for holding, crimping, bending, and cutting. The application area is very wide and there are many varieties.

  • Knee Pads

Protective knee pads create a large surface area between the floor and the knee, distributing this weight to the knees, reducing the force transmitted to the kneecaps and helping to maintain the health of our knees due to working conditions. Thanks to its special design, it accelerates your work by allowing you to work on your knees comfortably and healthily all day long.

  • Gloves

Work gloves should be made of durable materials. Similarly, work gloves to be given to workers who work with toxic substances and those who work in the works where the hands are in constant water should be made of rubber or latex.



  • Eye Protection and Dust Masks

In eye protection materials the reason why the protective glasses are made of polycarbonate material is that it is easier and less costly to produce compared to the brittle glass, 20 times more resistant to impacts and 3 times lighter.

Dust masks are breathing apparatus designed to provide protection against solid and liquid aerocells/particles consisting mainly of filter material, covering the mouth and nose and jaw.

  • Trash Bags

Trash bags are produced in various sizes and widths for hygienic storage and transportation of all kinds of waste related to humans and nature.

  • Screwdriver

A screwdriver is a tool that can be used for screw insertion and removal, tightening and loosening. In general, the end and middle part (for strength) are made of metal, and the handle part (for ease of hand-holding) is made of plastic. The rechargeable types carry a battery underneath and are end-replaceable.

  • Vacuum Cleaner

A vacuum cleaner is a household appliance for absorbing and removing solids and liquids from the environment.

How To Store Carpets After Removal


One feature of the carpets is to keep the house warm. Especially if wool woven carpets are used in homes, it is necessary to clean and remove this carpet in summer. When cleaning the carpet to be removed, it must be cleaned professionally or wiped using white soap. Afterward, it should be ensured that it dries thoroughly in an airy environment and does not remain moist. When removing carpets, you need to pay attention to a number of elements. The carpets which have been removed by taking these into consideration shall be kept clean and well maintained.



The carpet to be stored must be clean. It is important to vacuum the cleaned carpet with a vacuum cleaner before removing it and to remove all the dust, fluff, and hair from it. Afterward, the carpet is rolled up and wrapped tightly in the direction of the yarns going on.

If the carpet is to be stored for a long time, mothballs are placed between them to prevent moths. The carpet made by the roll is tied with rope so that it cannot be opened. An old sheet or cloth bag is put on it and packaged properly and stored without bending vertically or horizontally. If it is to be stored for a long time, it is necessary to open and ventilate the carpet once a month and to re-close the carpet in the same way by renewing the mothballs. Storing the carpet by folding will result in fold lines on the carpet and eventually will cause the carpet to be ripped. Therefore, do not fold while storing.

In addition, the carpet saddlebags sold in the market when storing carpets is one of the products that will provide you convenience. Since these bags are made of air-permeable fabrics, it is possible to store your carpet without being moistened or dusted. It will be a very practical storage method to place the carpet you have brought into the shape of a roll in this bag and to close the zipper from end to end.



Carpets should be stored in warehouses and home environments. Carpet stored warehouses should be clean, dry and lighted by natural or artificial lights. In these environments, the air humidity should be maximum 60-65%. The carpets stored in the warehouse should be collected on the board and placed at some intervals from the wall and protected from dust, dirt and direct sunlight. As long as the carpet is stored, the fight against moths and rodents must be meticulously paid attention, and fire prevention measures must be taken. The best means of protecting carpet products exhibited in places such as museums from moths and other pests are showcases made of synthetic material or normal glass. The advantage of the display case is that it protects the exhibited carpets from dust, moths and other pests, and at the same time, it is easy to change the pose by placing a large number of samples in the display case.

In the home environment, the carpet needs to be wrapped in rolls to be removed and stored in summer. In no case do not fold the carpet in four. Otherwise, the carpet is crushed. When removing the carpet for a long time, it is necessary to use materials against moths attacks. The most common means of combating moth is naphthalene. However, its use is not recommended by health institutions. Naphthalene has been included in the unwanted material lists since its carcinogenic properties have been identified which are harmful to the human body. Dried branches of the mugwort herb, lavender, geranium leaves, orange peels or strawberry soap, which have been used for a long time among the public, may be effective against moth problems. Natural or chemical materials are not effective enough to combat larvae. Clove is one of the natural materials used against moths. The buds can be collected in gauze bags and placed between the carpets.

Best Carpet Removal Accessories You Can Buy Online


  • Roberts 10-10 Carpet Puller with Manual Clamping Activation for Pulling Carpet During Installation or Removal (Price: $21.97)


  • Utility Knife, BIBURY Upgraded Version Heavy Duty Box Cutter Pocket Carpet Knife with 10 Replaceable SK5 Stainless Steel Blades, Belt Clip, Easy Release Button, Quick Change and Lock-Back Design (Price: $9.99)


  • Husky Folding Sure-Grip Lock Back Utility Knives Multi-Pack (3 Piece Set: 3 x Husky Knives w/ Blades) (Colors Vary) (Price: $24.95)


  • Box Cutter Utility Knife Heavy Duty 3 Pack, Craft 18 mm Retractable and Auto Charge – Work Perfect in Everyday Use, Rubber Handle, A, B, S Body, and Anti-Rust Black Blade Slot (Price: $13.90)


  • NoCry Cut Resistant Protective Work Gloves with Rubber Grip Dots. Tough and Durable Stainless Steel Material, EN388 Certified. 1 Pair. White, Size Medium (Price: $15.49)


Savaş Ateş

I'm a software engineer. I like history and reading about carpets. I like to play soccer too :)

Recent Content